Product overview on ppsh41 for sale:
The Ppsh for sale (Russian: Пистоле́т-пулемёт Шпа́гина, tr. Pistolét-pulemyót Shpágina, lit. ‘Shpagin’s machine-pistol’) is a Soviet submachine gun designed by Georgy Shpagin as a cheaper and simplified alternative to the PPD-40. A common Russian nickname for the weapon is “papasha” (папа́ша), meaning “daddy” and it was sometimes called the “burp gun” because of its high fire-rate.
Thank you for reading this post, don't forget to subscribe!
The ppsh 41 is a magazine-fed selective-fire submachine gun using an open bolt, blowback action. Made largely of stamped steel, it can be loaded with either a box or drum magazine and fires the 7.62×25mm Tokarev pistol round.
A 1942 PPSh-41 with a 35-round box magazine
The impetus for the development of the PPSh came partly from the Winter War against Finland, where the Finnish Army employed the Suomi KP/-31 submachine gun as a highly effective tool for close-quarter fighting in forests and built-up urban areas. Its 71-round drum magazine was later copied and adopted by the Soviets for their PPD-40 and ppsh 41 submachine guns.
The PPD-40 was subsequently rushed into mass production in 1940, but it was expensive to manufacture, both in terms of materials and labor, because it used numerous milled metal parts, particularly its receiver. Georgy Shpagin’s main idea for cost reduction was to use metal stamping for the production of most parts. Shpagin created a prototype PPSh in September 1940, which also featured a simple gas compensator designed to prevent the muzzle from rising during bursts; this improved shot grouping by about 70% relative to the PPD.
The new weapon was produced in a network of factories in Moscow, with high-level local Party members made directly responsible for meeting production targets. A few hundred weapons were produced in November 1941 and another 155,000 were made during the next five months. By spring 1942, the PPSh factories were producing roughly 3,069 units a day. Soviet production figures for 1942 indicate that almost 1.5 million units were produced.
Its parts (excluding the barrel) could be produced by a relatively unskilled workforce with simple equipment available in an auto repair garage or tin shop, freeing more skilled workers for other tasks. The PPSh-41 uses 87 components compared to 95 for the PPD-40 and the PPSh could be manufactured with an estimated 5.6 machining hours (later revised to 7.3 hours) compared with 13.7 hours for the PPD.Barrel production was often simplified by using barrels for the 7.62mm Mosin–Nagant: the rifle barrel was cut in half and two PPSh barrels were made from it after machining the chamber for the 7.62×25mm Tokarev cartridge
PPSH-41 Russian Parts Kit
- PPSH-41 Parts Kit
- Civilian Legal Kit
- Barrel, Receiver & Mag Needed to Complete Kit
- Markings Etc. May Vary
- No FFL needed, this is not a complete firearm
- Surplus NRA Rated Very Good to Excellent
Condition Standards for Antique/Surplus Firearms (As defined by the National Rifle Association)
- FACTORY NEW- all original parts; 100% original finish; in perfect condition in every respect, inside and out.
- EXCELLENT- all original parts; over 80% original finish; sharp lettering, numerals and design on metal and wood; unmarred wood; fine bore.
- FINE- all original parts; over 30% original finish; sharp lettering, numerals and design on metal and wood; minor marks in wood, good bore.
- VERY GOOD- all original parts; none to 30% original finish; original metal surfaces smooth with all edges sharp; clear lettering, numerals and design on metal; wood slightly scratched or bruised; bore disregarded for collectors firearms.
- GOOD- some minor replacement parts; metal smoothly rusted or lightly pitted in places, cleaned or reblued; principal lettering, numerals and design on metal legible; wood refinished, scratched, bruised or minor cracks repaired; in good working order.
- FAIR- some major parts replaced; minor replacement parts may be required; metal rusted, may be lightly pitted all over, vigorously cleaned or reblued; rounded edges of metal and wood; principal lettering, numerals and design on metal partly obliterated; wood scratched, bruised, cracked or repaired where broken; in fair working order or can be easily repaired and placed in working order.
- POOR- major and minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated; wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm.